Filter
Top Products
56 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome
F.01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc.
13. Select the option "DTime" to set the dwell time for the
scan.
14. Set the desired time (from 3 minute to 60 seconds).
15. Select the option "Direction."
16. Select the appropriate value for the direction of the scan.
17. Select the option "Mode."
18. Select the appropriate value for the mode. In Auto Scan
there are two modes:
– Endless mode: When the Start Position is the same as
the Stop Position, the dome moves around.
– Coming/Going mode: When the Start Position is
different from the Stop Position, the dome moves
repeatedly from one position to another.
19. Save the settings.
Note: Select the option "Clear" to delete the scan.
7.11 Alarm Setup
This menu controls alarm inputs and outputs. To set alarms:
1. From the MAIN MENU, select ALARM SETUP. The screen
ALARM SETUP appears.
2. Select the option "NO.###" to select a preset number.
– In order to call an action (Preset, Pattern, Tour, or Scan),
you must save Preset, Pattern, Tour, or Scan first.
– You can also edit the Scan title. Select the option "Title,"
then edit the title following the steps in
Section 7.2.1 Editing Titles, page 32.
ALARM SETUP
NO.
IN
OUT
PRIORITY
ACTION
NUMBER
ATIME
SAVE