Bosch Appliances VEZ-400 Security Camera User Manual


 
VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 29
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
7 On-Screen Display (OSD) Menu
When the camera is powered-up, the start-up screen appears
on the monitor.
7.1 Basic Navigation and Common Actions
Camera operators can operate the camera by two methods:
Use of hot keys [Refer to Section 11 Bosch Protocol,
page 63].
Use of the OSD Menu displayed on the monitor [Continue
to read this chapter].
The following table identifies the symbols that depict actions of
the joystick controller, or the keys on the keyboard, that control
the camera.
NOTICE!
Before beginning this section of the manual, you must install
and connect the camera to an interface device. Refer to the
Mounting Manual. Once you have installed the camera, apply
power to the camera.
VEZ-400 MINI PTZ DOME
RS-485/9600
ID001
CAM TEST ...PASS
NOTICE!
The step-by-step instructions in this chapter are written with
the idea that camera operators know the joystick/keyboard
commands (listed in the table below) for actions (Select, Clear,
Save, Exit).