Filter
Top Products
VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 43
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
3. Select the option "Mode."
4. Select the appropriate value:
– Auto Trace White balance (ATW): Aligns the white
balance automatically. (2,300 to 11,000 K)
– Indoor: 3200 K Base Mode
– Outdoor: 5400 K Base Mode
– Push WB mode: The white balance is aligned during
key input. (White balance push auto key)
– Manual WB mode: Red and Blue gain values can be set
by user, 0 ~ 255
– Auto White Balance mode (AWB): Wide range auto
white balance mode. In this mode, the white balance
is performed at a faster operating speed than ATW.
5. Select the option "R Gain" to set the red gain.
6. Select the appropriate value.
7. Select the option "B Gain."
8. Select the appropriate value.
9. Save the settings.
7.5.3 AE Setup
Shutter speed controls the electronic shutter. Set the shutter
speed to operate automatically (Auto) or manually (Numeric
Value). The Automatic Gain Control (AGC Gain or AGC Max)
adjusts the brightness of the pictures. The brightness increases
as the numeric value is set higher. SSNR enhances the digital
noise reduction properly. There are three settings: Low/Middle/
High. When gain levels raise, SSNR will reduce the noise to
display a clearer image. When Input luminance level is too dark,
WB SETUP
MODE
R GAIN
B GAIN
SAVE
BACK