Open as PDF
Press the shutter button all the way
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
ash res automatically.
Keep the camera still until the shutter
After displaying your shot, the camera will
revert to the shooting screen.
Press the movie button. The camera
beeps once as recording begins, and
Rec] is displayed with the elapsed
ELPH 170 IS
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
off the movie button.
Resize the subject and
recompose the shot as needed.
To resize the subject, repeat the
operations in step 3 (=
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
When you recompose shots, the
focus, brightness, and colors will be
Press the movie button again to stop
shooting. The camera beeps twice as
Recording will stop automatically when
the memory card becomes full.
Downloaded From camera-usermanual.com Canon Manuals