Open as PDF
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1 Congure the setting.
Press the <n> button, choose [AF-
Point Zoom] on the  tab, and then
choose [On] (=
2 Check the focus.
In [Face AiAF] AF mode, the face
detected as the main subject is magnied
when the shutter button is pressed
halfway. In [Center] AF mode, the AF
frame in the center is magnied.
• The area in focus is not magnied in the following cases when the shutter
button is pressed halfway.
- [Face AiAF]: When a face was not detected, or when the person is too close
to the camera and their face is too large for the screen
- [Center]: When the camera cannot focus on the subject
- [Tracking AF]: Not magnied in this mode
- Digital zoom (=
30): Not magnied with this feature
Changing the Focus Setting
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed. Instead,
you can limit camera focusing to the moment you press the shutter button
Press the <n> button, choose
[Continuous AF] on the  tab, and then
choose [Off] (=
Helps avoid missing sudden photo opportunities, because the camera
constantly focuses on subjects until you press the shutter button halfway.
Off Conserves battery power, because the camera does not focus constantly.
Downloaded From camera-usermanual.com Canon Manuals