Filter
Top Products
64
Troubleshooting
Battery cover lock not in
lock position
2CR5 lithium battery is
inserted the wrong way
Insufficient battery power
(LCD panel displays [Lb])
Incorrect battery type
Poor contact between
battery and camera
terminals
Mode Dial is set to L (Lock)
position
Problem Cause(s) Solution(s)
Camera will not operate
Camera will not shoot
• Slide the battery cover lock into the
locked position.
• Install the 2CR5 lithium battery with
the terminals oriented toward the
back of the chamber.
• Use a fully charged battery pack.
• Replace the battery.
• Use an approved AC power source.
• Use the specified battery pack or
lithium battery.
• Wipe the battery terminals with a
clean, dry cloth.
• Turn the Mode Dial to any one of
the
(Auto), P (Program) or
(Stitch Assist) mode positions.