Filter
Top Products
12 Before Using the Printer
Loading Paper in the Front Tray
You can load A4, Letter, or B5-sized plain paper (such as Canon Super White Paper SW-201) in
the Front Tray. You cannot load any other paper in the Front Tray.
1 Flatten the four corners of the paper before loading it.
See “Flatten the four corners of the paper before loading it.” on page 10.
2 Prepare to load paper.
(1) Open the Front Tray.
(2) Extend the Output Tray Extension.
(3) Set the Paper Thickness Lever to the left.
.
3 Load the paper with the print side facing DOWN.
(1) Load the paper into the Front Tray with the
print side facing DOWN and the leading edge
to the far side.
.
(2) Align the right edge of the paper stack against
the inner face of the Front Tray.
(3) Align the near and left edges of the paper stack
with the Paper Size Mark.
(4) Pinch the Paper Guide and slide it until it lightly
touches the left side of the loaded paper stack.
.
.
Note
Reset the Paper Thickness Lever to the left when
you finish printing. For details on the Paper
Thickness Lever, refer to “Front View” in “Main
Components” of the User’s Guide on-screen
manual.
Important
Do not load higher than the Load Limit Mark (A).
Important
If the Paper Guide is pressed too firmly against
the side of the loaded paper, the paper may bend
and not feed properly.
Important
When loading paper in the Front Tray, refer to the
illustration left and make sure not to load paper with the
wrong side up.
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(A)