Filter
Top Products
15Before Using the Printer
2 Retract the Paper Support.
.
3 Load the envelopes.
(1) Load the envelope against the Cover Guide
(the right side of the Paper Support). Load with
the address side facing UP and the rear flaps
DOWN on the left. Up to 10 envelopes can be
loaded at once.
.
(2) Pinch the Paper Guide and slide it against the
left side of the envelope.
(3) Set the Paper Thickness Lever to the right.
.
4 Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
.
Important
Envelopes may not be fed properly if the Paper Support is extended.
Important
Make sure that the Cover Guide is set upright,
when you load paper in the Rear Tray.
Note
Reset the Paper Thickness Lever to the left when
you finish printing. For details on the Paper
Thickness Lever, refer to “Front View” in “Main
Components” of the User’s Guide on-screen
manual.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see “Printing with Windows” on page 17 or “Printing with
Macintosh” on page 18.
(A)
(B)
(3)
(1)
(2)
(A) Printing orientation
(B) Make sure the flaps are folded.