Filter
Top Products
40
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
(1) [Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast],
[Synchronize with computer time].
(2) [Date], [Time]
Set the following according to the selection made in
[Setting Method].
[Set manually]
Set the desired date and time. The date is set by <year/
month/day>, and the time in 24-hour format in the
order <hour:minute:second>
[Synchronize with NTP server]
The camera will synchronize with the NTP server
time.
(3) [Auto-Setting of NTP Server]
[Disable]
Select when specifying an arbitrary NTP server.
Enter the IP address or host name of the NTP server
used in [NTP Server].
[Use DHCP]
The camera time is synchronized with the time of the
NTP server at the address acquired from the DHCP
server. In order to set [Use DHCP], you must
change [Network] > [IPv4 Address Setting Method]
to [Auto (DHCP)] (p. 37).
[Use DHCPv6]
The camera time is synchronized with the time of the
NTP server at the address acquired from the
DHCPv6 server. In order to set [Use DHCPv6], you
must change [Network] > [IPv6] to [Enable], then set
[Auto (DHCPv6)] to [Enable] (p. 38).
[Use DHCP/DHCPv6]
The camera time is synchronized with the time of the
NTP server at the address acquired from the DHCP
server or DHCPv6 server. Note that only one NTP
server name (address) is used. If NTP server names
(addresses) are acquired from both the DHCP
server and DHCPv6 server, the server displayed in
[NTP Server (DHCP)] is the one used.
[Synchronize with NTP broadcast]
The camera will synchronize with the NTP server
time. The camera will synchronize time with NTP
broadcasts received from the NTP server.
[Synchronize with computer time]
The camera will synchronize with the date and time
of the computer currently accessing the camera.
The [Time Zone] is not selected automatically, and
must be set separately as required.
(4) [Time Zone]
Select from the list the appropriate time difference
from the Greenwich Mean Time.
(5) [Daylight Saving Time]
Select [Enable] to automatically adjust the daylight
saving time according to the time zone or [Disable]
not to automatically adjust the daylight saving time.
Note
• If [Synchronize with computer time] is selected, after clicking
[Apply], [Setting Method] will change to [Set manually].
[Date and Time] Setting Date and Time
The following can be set here.
• Current Date and Time
The date and time set in the camera is shown.
• Setting
Select the date and time setting method, time
zone and daylight saving time for the camera.