Canon vb-s30D Security Camera User Manual


 
8
Maintenance
Turn off the power before cleaning the camera.
Cleaning of Exterior
1 Dampen a soft cloth with water or diluted neutral
detergent and wipe away the grime gently.
2 Wipe with a dry cloth.
Cleaning of Lens
Use a commercial lens cleaner to remove grime on the
lens surface.
Auto focus may not work properly if the lens
surface is dusty or dirty.
Be aware that scratches on the lens surface may result
in poor video capture.
Cleaning the Top Cover
Grime on the top cover will reduce video quality, so
periodic cleaning is required.
If the surface of the top cover cannot be cleaned well,
remove it following the steps below to clean it more
thoroughly.
1 Remove the top cover.
See steps in “Installing the Camera” in the “Installation
Guide” included with the camera to remove the top
cover.
2 Dampen a soft cloth with water or diluted neutral
detergent and wipe away the grime gently.
3 Wipe with a dry cloth.
4 Reattach the top cover to its original position.
Periodically check the brackets and screws for rust and
loosening to prevent injuries and equipment damage due
to falling items.
For inspections, please contact the dealer where you
purchased the product.
Disposing of the Camera
Dispose of the camera in accordance with local laws and
regulations.