Filter
Top Products
56 Troubleshooting
Error Number: 300 Is Displayed
Error Number: 1700/1710 Is Displayed
Ink Info Number: 1688 Is Displayed
Ink Info Number: 1686 Is Displayed
Cause Action
The printer is not ready. Confirm that the Power lamp is lit green.
If the Power lamp is off, turn the printer on.
While the Power lamp is flashing green, the printer is initializing. Wait until the
Power lamp stops flashing and remains lit green.
If the Alarm lamp is flashing orange, an error may have occurred in the printer.
For details on how to resolve the error, see “Alarm Lamp Flashes Orange” on
page 53.
Printer is not connected properly. Make sure that the USB cable is securely plugged in to the printer and the
computer.
z If you are using a relay device such as a USB hub, disconnect it, connect the
printer directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
z There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
Your printer is not selected in Printer
on the Print dialog box.
Select your printer’s name in Printer on the Print dialog box.
If your printer’s name does not appear in Printer, follow the procedure below to
check that the driver for your printer is installed to your computer.
(1)Select Print & Fax Preferences from Printer.
In Mac OS X v.10.3.9, select Edit Printer List from Printer.
(2)Check that your printer’s name is displayed in the list of printers and that the
check box is selected.
(3)If your printer’s name is not displayed, click Add(+) to add the printer.
If you cannot add the printer, follow the procedure described in your setup
sheet to reinstall the printer driver.
Cause Action
The ink absorber is almost full. See “Eight flashes: Ink absorber is almost full.” in “Alarm Lamp Flashes Orange”
on page 53.
Cause Action
Ink has run out. Refer to “Four Flashes: Ink has run out.” in “Alarm Lamp Flashes Orange” on
page 53.
Cause Action
Ink level cannot be detected. Refer to “Sixteen Flashes: Ink level cannot be detected.” in “Alarm Lamp
Flashes Orange” on page 53.