Filter
Top Products
11D-Link DCS-5605/5635 User Manual
Section 1 - Product Overview
As the Digital Input signal is controlled by an external device, we recommend that you set your device to feed no current
normally, and feed a 12V current only to trigger a DI event on the DCS-5605/5635.
You can connect a motion sensor to the DI port, signaling the camera to take a snapshot and to trigger an alarm
connected to the DO port.
Receives signals from an outside sensor. Connect any external security device to the DI port.
Triggers an output device such as a buzzer or alarm.
External device ports connected to the DI or DO port must provide 12V power.
DI/DO Input Specifications
Open circuit
Short circuit
After powering on or rebooting the DCS-
5605/5635, the camera will be in Normal mode
by default.
No current
12V current