Filter
Top Products
63D-Link DCS-5605/5635 User Manual
Section 3 - Configuration
Check this box to enable the D/O port.
When checked, the D/O port will send a signal
whenever motion is detected by the camera.
(When motion detection has been enabled)
When checked, the D/O port will send a signal
whenever a signal is detected on the Digital
In (D/I) port.
Digital Output
Enable D/O:
Motion Detection:
D/I:
This screen allows you to enable the Digital Out (D/O) port, and allows you to select what events will trigger the Digital
Out signal.