Filter
Top Products
52D-Link DCS-5605/5635 User Manual
Section 3 - Configuration
Click this box to enable video motion
detection.
This setting adjusts how sensitive
the camera will be to motion, where
100% will be the most sensitive
setting and 0% will be the least
sensitive setting.
This will allow you to draw motion
detection zones when clicking and
dragging, or erase motion detection
zones when clicking and dragging
depending on which option you have
selected.
Clicking this button will clear all
motion detection zones.
After making any changes, click the
button to save your
changes, or click the
button to discard your
changes.
Motion Detection
This option allows you to set up Motion Detection on your IP camera. In order to use motion detection you must
rst check the checkbox. You can then click on the video window and draw motion detection
zones by clicking and dragging your mouse. Red areas indicate areas that will be monitored for motion.
Enable Video Motion:
Sensitivity:
Draw Motion Area:
Erase Motion Area: