Filter
Top Products
91D-Link DCS-5605/5635 User Manual
Section 5 - Troubleshooting
This Windows error will occur if the Internet Camera is connected to a computer that is not
properly congured with a valid IP address. Turn off DHCP from the Network Settings in Windows
®
and congure the computer with a valid IP address, or connect the camera to a router with DHCP
enabled.
It could be that the CMOS sensor has become overloaded when it has been exposed to bright lights such as direct
exposure to sunlight or halogen lights. Reposition the Internet Camera into a more shaded area immediately as
prolonged exposure to bright lights will damage the CMOS sensor.
The video images might be noisy if the Internet Camera is used in a very low light environment. To solve this issue
you need more lighting.
Make sure that your computer’s display properties are set above 256 colors. Using 16 or 256 colors on your
computer will produce dithering artifacts in the image, making the image appear to be of poor quality.
The conguration on the Internet Camera image display is incorrect. Through the section of the Web
management you need to adjust the image related parameters such as brightness, contrast, hue and power line
frequency for uorescent light. Please refer to the section on Page 49 for detailed information.