Filter
Top Products
51D-Link DCS-5605/5635 User Manual
Section 3 - Configuration
JPEG Quality:
RTSP URL:
Enable Speaker:
Volume:
Enable Microphone:
Volume:
This sets the JPEG quality of any manual snapshots you take when this video prole is selected.
This setting allows you to set a sufx for your camera’s RTSP URL, so you can view your camera’s video with
this video prole’s settings. For example, if you enter “mpeg4” as your RTSP URL setting and your camera’s
IP is 192.160.0.30, you can view your camera’s video with these settings through 192.160.0.20/mpeg4 .
Video Prole 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video
Proles are viewable by non-IE browsers. Video Prole 4 is for mobile devices only, and always uses MPEG-4
as the Encode Type.
Checking this box will enable you to send audio to an external speaker (not included) attached to the external
speaker jack of your camera. This will allow you to speak with another person through your camera.
This sets the volume level of the external speaker.
Checking this box will enable you to listen to audio picked up by the camera’s microphone. This will allow you
to hear what is happening near your camera.
This sets the volume level of the incoming audio.
Higher frame size, frame rate and bit rates will give you better video quality, but they will also require
more network bandwidth. For best viewing results on a mobile phone, we suggest setting the frame rate to
5 fps and bit rate to 20 Kbps.
After making any changes, click the button to save your changes, or click the
button to discard your changes.