Filter
Top Products
1-9
Temporary error
<Hopper empty>
This message is displayed if there is no more paper on the ADF paper
chute during a read operation in ADF mode. Fill the ADF paper chute
with paper. To enable the read operation, press the stop button.
<Jam>
This message is displayed if a document is jammed in the ADF. See
the “Cleaning and Maintenance” manual for removing jammed
documents.
<ADF cover open>
This message is displayed if the ADF is not closed completely. Close
the ADF completely, and enable the read operation.
<Double feed error>
This message is displayed when the ADF detects the Double feed
error. Check the document and re-scan the document.
<No print cartridge installed>
This message is displayed when the print cartridge is not installed in
the imprinter. Install the print cartridge.
<Print position error or paper
alarm>
This message is displayed when the print position (t mark) of the
imprinter is positioned out of the paper path or the stacker is full of
paper. Set the imprinter in place or remove paper from the stacker.