Filter
Top Products
3-7
Guide lever
(Both sides)
Documents
Guide
max. 8 mm
(0.32")
4
Set the guides so that there is a small
clearance between the document edges
and the guides. Load the document face
down on the ADF paper chute and adjust
the guides to the document width.
NOTICES
• Squeeze the guide lever to free the guides.
• Do not load document stacks thicker than 8
mm.
• Set the guides so that they touch the
document sides.
5
After the read command is issued from
the host system and the documents are
read, scanned documents are expelled
into the stacker for removal.