Filter
Top Products
7-13
16. Adjust ADF Erasing Edges
<Screen 56>
1 Press “Next” or “Previous” and let the
scanner display Screen 56.
2 At Screen 56, press or to select “Yes”
and press . Then the scanner displays
Screen 56-1.
<Screen 56-1>
3 At Screen 56-1, select “Yes” to return the
settings to the factory default or select “No”
to make new settings (as shown below).
Then press . The scanner displays
Screen 56-2.
<Screen 56-2>
4 At Screen 56-2, press or to change the
top setting. The value changes in 1 mm
units. Then press to activate the
setting. The scanner displays Screen 56-3.
<Screen 56-3>
5 At Screen 56-3, press or to change the
bottom setting. With (+:Up), the area is set
upward from the bottom edge of the image.
With (–:Down), the area is set downward from
the bottom edge of the image. The value
changes in 1 mm units. Then press to
activate the setting. The scanner displays
Screen 56-4.
<Screen 56-4>
6 At Screen 56-4, press or to change the
left setting. The value changes in 1 mm
units. Then press to activate the
setting. The scanner displays Screen 56-5.
<Screen 56-5>
7 At Screen 56-5, press or to change the
top setting. The value changes in 1 mm
units. Then press to activate the
setting. The scanner displays the next setup
item.