Filter
Top Products
7-7
4. Reset of the abrasion counter
When you reset the abrasion counter, you must set it as follows:
1 Press “Next” or “Previous” and let the
scanner display Screen 44.
<Screen 44>
2 At Screen 44;
If you want to reset the abrasion counter,
select “Yes” through or button and
press . Go to procedure 3.
If you do not want to reset the abrasion
counter, select “No” and press . Finally
press to return.
<Screen 44-1>
3 At Screen 44-1;
If you want to reset the abrasion counter,
select “Yes” and press . If you do not
want to reset it, select “No” and press .
Press to return.
5. Setting the pick start time
When you set the pick start time, you must set it as follows:
1 Press “Next” or “Previous” and let the
scanner display Screen 45.
<Screen 45>
2 At Screen 45, press to increase the Pick
start time or press to decrease the Pick
start time. Then press to activate the
setting. Finally press to return.