Filter
Top Products
5-1
Basic Product Specification
Notes *1: The details are described in chapter 4.
*2: The actual scanning speed might differ due to host computers’ environment.
*3: These speeds do not contain processing time at the host computer.
*4: The maximum number will differ due to the paper thickness. Refer to chapter 4.
*5: The scanning speed might be slow. The usage with NO COMPRESSION is recommended.
*6: Both SCSI-2 and the Third Party Slot can not be used at the same time.
*7: The Power consumption of the boards should be as follows:
- In the Low Power Mode: Less than 0.35 A
- With fi-IPC4D option: Less than 1.5 A
- Without fi-IPC4D option: Less than 3.0 A
N
o
.
Item Specification Remarks
1
Operating method ADF (simplex), flatbed
2
Image sensor CCD x1
3
Light source Inert gas (Xenon) lamp Green
4 Document
Size
Minimum A8 (Portrait) 110 kg paper
Maximum A3 or 11x17
5
Document Thickness 52 g/m
2
(14 lb) to 127 g/m
2
(34 lb) Note *1
6
Optical Resolution 400 dpi
7Output
Resolution
Binary 100/150/200/240/300/400/600/800 dpi
Grayscale 100/150/200/240/300/400/600 dpi
8
Grayscale level (internal) 1024 levels (10 bits)
9 Scanning speed (mechanical)
Note *2
45ppm, 200dpi, A4, Portrait
32ppm, 300dpi, A4, Portrait
56ppm, 200dpi, A4, Landscape
Note *3
10
Halftone patterns Dither/Error diffusion
11
Capacity of ADF 100 sheets (A4, 64 g/m
2
(17 lb)) Note *4
12
Compression MH/MR/MMR Note *5
13 Interface
Note *6
SCSI-2 High Density (Half)
50-pin, Female
Third Party Slot Note *7