Filter
Top Products
7-3
(Continued)
* This offset refers to the difference from the value adjusted by automatic offset adjustment.
** Some restrictions apply to the detection of a double feed.
N
o
Item Description
Selectable
parameters
Default
13 Select Interface
Selects the interface when the scanner has
a board in the Third Party Slot.
Auto/SCSI/TPS Auto
14
Display TPS Board
ID Number
Displays the ID number of the board which
is installed in the Third Party Slot.
--- ---
15 IPC mode
When the IPC-4D image processing board
is installed in the third party Slot, select this
IPC-4D board or the image processing
circuit built in the scanner.
Scanner/IPC4D Scanner
16 ADF Edge Erasing
Adjusts the edge areas to be erased from
the image scanned by the automatic
document feeder (ADF).
Left/Right:
0 to 15 mm
Top:
0 to 15 mm
Bottom:
-7 to +7 mm
Left/Right:
0 mm
Top:
0 mm
Bottom:
0 mm
17 FB Edge Erasing
Adjusts the edge areas to be erased from
the image scanned by the flat bed (FB).
Left/Right:
0 to 15 mm
Top:
0 to 15 mm
Bottom:
0 to 15 mm
Left/Right:
0 mm
Top:
0 mm
Bottom:
0 mm
18 Ink Remain Resets the ink remain counterr. Reset/No No
19 Numbering Print
Enables or disables the numbering counter
when the fi-475PR Imprinter is installed.
On/Off Off