Filter
Top Products
7-16
2 At Screen 59, press or to select “On”
then press if you want to activate the
setting function. The scanner displays
Screen 59-1, indicating that the setting
function is activated.
NOTICE
When the setting function is disabled, the screen
is as shown right.
<Screen 59-1>
3 At Screen 59-1, select the number of digits.
Press or to select “5” or “8” then press
. The scanner displays Screen 59-2.
<Screen 59-2>
4 At Screen 59-2, select the initial number.
Press or to move the place of the
blinking (changeable) digit and press or
to change the value, then press . The
scanner displays Screen 59-3.
NOTICE
The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits).
<Screen 59-3>
5 At Screen 59-3, specify whether the number
is initialized at hopper empty. Press or
to select “On” if you want to initialize, then
press . The scanner displays Screen
59-4.
<Screen 59-4>
6 At Screen 59-4, specify whether the number
is reset at once. Press or to select
“yes” if you want to reset at once, then press
. The scanner terminates the setup
mode.
NOTICE
The command from the host computer overrides the specification of the operator panel. When the host
computer issues a command disabling the specification of the operator panel, Screen 59-4 does not
appear.