Filter
Top Products
Print photos from a memory card
This section describes several ways to print photos from a memory card, including one
photo, multiple photos, multiple copies of the same photo, and so on.
Important: Your photos are instantly dry, and can be handled immediately after they are
printed. However, HP recommends that you leave the printed surface of your photos
exposed to the air for 3 minutes after printing to allow the colors to fully develop before
you stack them with other photos or place them in albums.
One touch photo prints
1. Touch Home on the quick touch frame to return to the Photosmart Express menu,
if necessary.
2. Touch View and Print and navigate through the photos on the inserted memory card.
3. Touch the photo you want to print to display it in 1-up view.
4. Touch Print.
NOTE: If the print preview mode is set to On, you will get a preview image on
the screen. Touch Print again to start printing.
5. To add another photo to the print queue, touch Add more photos, select the next
photo you wish to print, and touch Print again. You do not have to wait for the first
photo to finish printing.
You can continue to browse through and print photos in 1-up view, or you can touch
and browse through your photos in thumbnail view.
To select photos, add copies, and print multiple photos
1. Touch Home on the quick touch frame to return to the Photosmart Express menu,
if necessary.
2. Touch View and Print and navigate through the photos on the inserted memory card.
3. Touch a photo you want to print to view it in 1-up view, and then touch the photo again
to select the photo. A checkmark icon appears on selected photos.
Print from a memory card 29
Print without a computer