HP (Hewlett-Packard) 850 Digital Camera User Manual


 
16 hp photosmart 850 user’s manual
Installing the memory card
1 With the camera turned off and
the back of the camera facing
you, open the memory card door
by sliding the door to the right.
2 Insert the memory card, making
sure that it snaps into place.
3 Close the memory card door.
To remove the memory card, first
make sure the camera is turned off.
Open the memory card door, then
push the memory card in and it will
spring from the camera.
Turning on power
Turn the camera on by rotating the
OFF/Mode selector to the mode
you want to use:
z Still mode
z Self-Timer mode
z Video mode
The lens extends, the Image Display turns on briefly, and the
Power/Memory light turns on solid green.
NOTE If the Power/Memory light is blinking red, the batteries
are very low, and the camera will shut down soon.
Replace or recharge the batteries, or use an optional HP
AC adapter to power the camera. For more information
about the HP AC adapter, see Purchasing camera
accessories on page 93.