Filter
Top Products
66 hp photosmart 850 user’s manual
Eye-Start
This Setup menu option allows you
to turn the eye-start sensor for the
viewfinder microdisplay on and off.
z On—Causes the camera to turn
the microdisplay on any time the
eye-start sensor detects that you
are looking through the viewfinder.
This is the default setting on the camera.
z Off—Disables the eye-start sensor and causes the camera to
turn the microdisplay on any time the Image Display is
turned off.
NOTE If Eye-Start is set to Off, the microdisplay will
automatically turn off if there is no button activity for
60 seconds. To turn the microdisplay on again, either
press the Shutter button halfway down or press the
Display button.
Date & time
This Setup menu option allows you to
set the current date and time, as well
as the date/time format, for the
camera. This is usually done when
you first set up the camera, but you
may need to re-set the date and time
when you are travelling to different
time zones, or when the batteries
are removed from the camera for more than 10 minutes.
To set the date, time, and date/time format, follow the same
procedure used in Setting the date and time on page 17.