Filter
Top Products
60 hp photosmart 850 user’s manual
3 Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome screen, click Start Unload. If there were any
images in the camera that were selected in the Share menu
for printing or e-mail, those actions are started after the
images have been unloaded to the computer.
4 When the unload screen on the computer says Finished,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE To unload the camera images to a computer that does
not have the HP Photo & Imaging software installed on it,
switch the camera to the Disk Drive setting in the USB
Configuration sub-menu of the Setup menu. This allows
the camera to appear as another disk drive on the
computer so that you can easily copy the image files from
the camera to the hard drive of your computer. For more
information, see USB configuration on page 67.
Printing images
NOTE You can also use the optional HP Camera Dock to do
this task. See Appendix B: Camera dock on page 95.
To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP DeskJet or
Photosmart printer that has a USB connection, then print
images selected from the camera Share menu or all images in
the camera.