Filter
Top Products
102 HP Photosmart R507/R607 User’s Manual
3 Open the rubber door on the side of the camera and
connect the small end of the USB cable to the USB connector
on the camera.
4 When the camera is connected to
the printer, a Print Setup menu
displays on the camera. If you
already selected images to print
using the camera Print button,
the number of images selected is
shown. Otherwise, Images: ALL is
displayed. To select or change the selections of images to
print, press the Print button, scroll through the images using
the buttons, then use the buttons to adjust the
number of copies for each image. When satisfied with your
selections, press the Print button again to return to the
Print Setup menu.
5 If all the settings in the Print Setup menu look correct, press
Menu/OK on the camera to begin printing. Or, you can
change settings in the Print Setup menu using the arrow keys
on the camera, then follow instructions on the screen to
begin printing.
NOTE There is a print preview in the lower right-hand corner
of the Print Setup screen showing the page layout that will
be used for printing images. This print preview updates as
you change the settings for the Print Size and Paper Size.