Filter
Top Products
42 HP Photosmart R507/R607 User’s Manual
NOTE If you change the flash setting, the camera will remain
in that setting until you change it or turn off the camera.
When you turn the camera on again, flash resets to the
default Auto Flash setting. Holding down the Menu/OK
button when you turn the camera back on will restore this
setting to what it was when you turned it off.
Setting Description
Auto Flash
The camera measures light and uses the flash if
necessary.
Red-Eye
The camera measures light and uses the flash with
red-eye reduction if necessary (see the following
NOTE for a description of red-eye reduction).
Flash On
The camera always flashes. If the light is behind your
subject, you can use this setting to increase the light
on the front of your subject. This is called “fill-flash.”
Flash Off
The camera will not flash, no matter the lighting
conditions.
Night
The camera fires the flash if necessary (using red-eye
reduction) to illuminate objects in the foreground. It
then continues to expose as if the flash had not fired to
gather the background (see the following NOTE for a
description of red-eye reduction).
A
A