Filter
Top Products
2
basics guide 15
set the defaults on your printer
Your printer comes with default settings for features such as number of copies to
print, photo size, language setting for the LCD screen, and other settings. You
can change these settings to your preferences using the printer’s control panel.
Note: When you print from your computer, the control panel settings on the
printer do not apply. The software on your computer overrides the default
settings you set using the printer’s control panel.
For more information about other default setting options available from the
control panel, see the HP Photosmart Printer Help.
keep or discard print settings after printing
You can choose whether to keep or discard your current print settings and photo
selections after each print job. The printer’s default setting is to ask for print
settings each time you print.
1 On the printer’s control panel, press the M
ENU button.
2 Press the S
ELECT PHOTOS button until Preferences appears highlighted
on the LCD screen, and then press the OK button.
3 Press the S
ELECT PHOTOS button until After printing appears
highlighted on the LCD screen, and then press the OK button.
4 Select from the following options:
– Always if you want the printer to always keep the current print settings
after a print job
– Never if you want the printer to reset all print settings to the default
settings after a print job
– Ask if you want the printer to ask after each print job whether to keep
the current print settings
5 With your selection highlighted on the LCD screen, press the OK button.