Hitachi VM-3800A Camcorder User Manual


 
CHARGING A BATTERY
21, Plug the AC adaptor/charger power cord into AC electrical outlet.
2. Attach the battery to the AC adaptor/charger. Align the mark ,,.v,,on the battery with that of
AC adaptor/charger and push the battery flush with the AC adaptor/charger and slide it in the
direction of arrow.
I NOTE: You must remove the DC cord from the AC adapt0r/charger to charge the battery. If 1
the DC cord is c0nnectedl "CHARGE" light will not light.
3. The "CHARGE" light will be lit while the battery is accepting a charge, and will go out
when the battery is fully charged,
Fr
E
Charging Time and Operation Time
VM-BP66 VM-BP67
Charging Time about 2 hours about 3 hours
Operation Time about 1 hour about 2 hours
NOTES:
1. The operation time depends on how often you use zoom and recording pause.
2. Charge the battery after each use and store it at normal room temperature.
3. Recharge the battery at least once every six months. The battery is a lead-acid battery.
This battery tends to discharge if not used for an extended period of time. If the battery is
stored for an extended length of time without being recharged, you may not be able to
recharge it.
4. A battery charged after being stored for a long period may not supply power for the
specified time. Additional rechargings will help restore the battery's operation time.
5. The battery should be charged at a temperature of 50 °F--86°F (10°C--30°C) to prevent
damage.
6. Do not operate the battery at temperatures below 14°F (-10°C) or above 95°F (35°C).
]5