Hitachi VM-3800A Camcorder User Manual


 
AUDIO AND VIDEO DUBBING
9The audio and video dubbing feature lets you record new audio (sound) and video (pictures)
simultaneously on a previously recorded tape.
When you audio and video dub a tape, the previous audio and video are erased and replaced with the
new sound and pictures. The replacement audio and video can be the sound and picture taken by the
camera or from a video source connected to "AUDIO" and "VIDEO" jacks on the camcorder.
INOTE: when dubbing the soUnd and picture from a video sourcel set ',AV OUT/IN" switch
to ,IN" position;iWhen dubbing the sound and picture from !.he camera, set ',AV OUT/IN',
switch to OUT and do not connect AUDIO and VIDEO jacks.
1. Insert a recorded tape. Be sure that the record safety tab is not missing.
2. Place "POWER" switch in "VIDEO" position.
3. Press "PLAY" button and then "REW" or "F.FWD" button to search to the
approximate position of the tape on which you want to dub sound and picture.
4. Press "PLAY" button again to search the exact position where you wish to stop
dubbing and then press "REC/PAUSE" button at the exact position.
46