Filter
Top Products
EN 63
Master Page: Right
Make Connections
Also refer to page 26.
* Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
** When connecting the cable, open the cover.
*** If necessary, use this cable for connections.
1 A A JVC VCR equipped with a Remote PAUSE
connector…
…Connect the editing cable to the Remote
PAUSE connector.
B A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an
R.A.EDIT connector…
…Connect the editing cable to the R.A.EDIT
connector.
C A VCR other than above…
…Connect the editing cable to the remote
control’s PAUSE IN connector.
2 Insert a recorded tape into the camcorder.
3 Set the Playback Mode Switch to “VIDEO”.
4 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
5 Turn the VCR power on, insert a recordable tape
and engage the AUX mode.
● Refer to the VCR’s instructions.
NOTES:
● Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If
they do, they will be recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV…
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(੬ pg. 35, 42) Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(੬ pg. 35, 42)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (੬ pg. 35, 42)
DISPLAY
1234
VCR
TV
ABTo Remote PAUSE or
R.A.EDIT
CTo PAUSE IN
Connector Cover**
S/AV/Editing cable
(provided)
To S/AV
Editing extension cable
(provided)***
A Black to S-VIDEO IN*
B Yellow to VIDEO IN
C White to AUDIO L IN
D Red to AUDIO R IN
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
GR-HD1US.book Page 63 Monday, April 14, 2003 5:21 PM