JVC GY-DV300 Camcorder User Manual


 
E-23
Normal display in the shooting mode
qw
e
r
t
No. Item Contents
1 Zoom ratio (Characters, Displayed during zoom operation. The characters indicate the wide-
numeric value) angle (W) and telephoto (T) zoom positions. The numeric value indicates
the approximate zoom ratio.
2 Time code display Shows the time code (hours, minutes, seconds, frames).
Whether this should be displayed can be selected by setting the TIME
CODE item on the DISPLAY [2/2] menu screen.
3 Recording time mode Shows the recording speed at the time of the recording.
indication SP : Standard Play mode
LP : Long Play mode
When the remaining tape indication is OFF, this indication is shown at
the 4 position.
4 Remaining tape time Indicates the remaining tape amount (minutes) in 1-minute steps.
indication Whether this indication should be ON or OFF can be selected by setting
the TAPE REMAIN item on the DISPLAY [2/2] menu screen.
* The indication may not appear when a new tape is loaded, after the
tape runs, the indication appears.
5 Remaining battery The remaining battery power is indicated by four different indicators.
power indication
Blinking indicator
(no remaining
battery power)
Fully charged
battery