Filter
Top Products
E-34
Battery pack
Connector
Battery Pack Operation
PREPARATIONS
Power Supply Preparation (cont’d)
Use the optional battery pack BN-V416 or BN-V428 for battery pack operation.
The BN-V416 battery pack cannot be used when the optional Network Pack KA-DV300 is used.
Before use the battery pack should be charged using
the optional AC Adapter/Charger AA-P30.
1.
Plug the AC cable of the AC Adapter/Charger
into an AC outlet. The POWER lamp illuminates.
2.
While pushing the battery pack down, slide it
in the direction of the arrow to mount it on the
AC Adapter/Charger. Charging starts, and the
CHARGE lamp blinks green. It changes to light
steadily when charging is completed.
3.
When charging is completed, remove the
battery by sliding it in the opposite direction of
the mounting direction.
*For details, see the instruction manual for the AA-
P30.
Charging the Battery Pack
POWER lamp
Battery
pack
AC cord
AC outlet
AA-P30
CHARGE lamp 1
Ⅵ If the DC cable is connected to the GY-DV300,
unplug the cable.
1.
Hold the battery pack with the connector side
facing the GY-DV300.
2.
While pressing the battery pack against the GY-
DV300, slide it downward to attach it to the GY-
DV300.
Attaching the Battery Pack on the GY-DV300
Ⅵ Ensure that the POWER switch on the GY-
DV300 is set to OFF.
1.
While pressing the battery lock release button,
slide the battery pack upward to remove it.
Detaching the Battery Pack from the GY-DV300
Battery lock
release button
CAUTION:
Do not detach the battery pack while recording
is taking place.
CHARGE lamp 2