![](http://pdfasset.owneriq.net/3/92/39221cf7-f18b-416e-9634-4cc6cd3adfd1/39221cf7-f18b-416e-9634-4cc6cd3adfd1-bg21.png)
E-33
AC Operation
Use the optional AC Adapter/Charger AA-P30 as the AC power supply.
The DC INPUT connector on the GY-DV300 accepts power voltage in the range of DC 6V to DC 12V.
PREPARATIONS Power Supply Preparation
The GY-DV300 is operable with AC power supply or battery pack.
Ⅵ Set the POWER switch on the GY-DV300 to OFF.
If a battery pack is attached to the unit, detach the battery pack.
1.
Plug one end of the DC cable provided with the AC Adapter/Charger into the DC INPUT connector of
the GY-DV300, and then connect the other end to the DC OUTPUT connector on the AC Adapter/
Charger.
2.
Plug the AC cable of the AC Adapter/Charger into an AC outlet. The POWER lamp illuminates when
power is supplied to the AC Adapter/Charger.
* For details, see the instruction manual for the AA-P30.
CAUTION:
• Do not disconnect or connect the DC cable or AC cord while recording is taking place.
• Remaining battery power indication when the AC adapter is used
When the optional Network Pack KA-DV300 is connected, the remaining battery
power indication for fully charged battery may not be displayed.