Filter
Top Products
Menu Settings
Setting Details
DIRECT MONITORING Configures various settings related to DIRECT MONITORING.
0
PASSWORD
Sets the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 138)
0
ENFORCED GROUP OWNER (Default: “ON”)
Set whether or not to get the owner group permissions.
・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・ON: It is recommended to set this usually.
“Setting the Enforced Group Owner (DIRECT MONITORING)” (A p. 139)
0
HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 139)
INDOOR MONITORING Configures various settings related to INDOOR MONITORING.
0
PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 138)
0
HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 139)
OUTDOOR MONITORING Configures various settings related to OUTDOOR MONITORING.
0
PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 138)
0
UPnP (Default: “ON”)
Sets the UPnP of the camera.
・OFF: Disables UPnP.
・ON: Enables UPnP.
“Setting the UPnP of this Camera (OUTDOOR MONITORING)” (A p. 140)
0
DDNS SETTING
Configures various settings related to DDNS.
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)” (A p. 141)
0
HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 139)
DETECT/MAIL Configures various settings related to notification mails.
0
DETECT/ MAIL ATTN.
Selects the recipient’s e-mail address for Detect/Mail.
“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” (A p. 125)
0
MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” (A p. 142)
“Registering the Recipient’s E-mail Address of the Camera” (A p. 144)
0
DETECTION METHOD (Default: “MOTION DETECTION”)
Sets the detection method to start recording.
・MOTION DETECTION: Starts recording upon detection of subject’s movements.
・FACE DETECTION: Starts recording upon detection of human faces.
“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” (A p. 146)
0
DETECTION INTERVAL (Default: “10 minutes”)
Sets the time period to enable detection again after the previous one.
“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 146)
0
SELF RECORDING (Default: “ON”)
Sets whether to record videos on this camera during detection.
・OFF: Does not record videos on this camera.
・ON: Records videos on this camera.
“Setting Self Recording on this Camera (DETECT/MAIL SETTING)” (A p. 147)
Using Wi-Fi (GZ-EX355/GZ-EX310)
136