Filter
Top Products
32
EN
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
IN UTS/AV P
DE. . NAV I L
SKCHBLAN R
COPY
STEREO–
SOUND
1
SP
OFF
OFF
–
–
–
–
–
NRETUR
O.O
RE NEON SC LCD/TV
UAOT
IMETDATE/
T I ME CODE
–
–
– FFO
NRETUR
BEEP
MELODY
NO
TALLY
–
–
DEMO MODE – NO
NA GAT IONVI
–
FFO
TITL W/
–
AECKGRNDB
SOUN IN
–
IDCMAUX/
E-CL P R
–
4
IEC
0X1762
CAM ERSET
NRETUR
MSYSTE
AYDISPL
VIDEO SOUND MODE
MODE
MODE
12
BIT
SYNC ROH
REC
IN UTPS/AV
DE . LNAV . I
SCHRBLA KN
END
COPY
For Playback Menu
The following procedure applies to all except Synchro
Comp (੬ pg. 70).
1 Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2 Press the MENU wheel in. The Menu Screen
appears.
3 Rotate the MENU wheel to select the desired
function menu, and press it. The selected function
menu appears.
4 Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5 Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6 Rotate the MENU wheel to select “ RETURN”
and press it twice to close the Menu Screen.
Display
Power Switch
MENU Wheel
Lock Button
Recording Start/Stop Button
NOTES:
● The date indication can also be turned on/off by
pressing DISPLAY on the remote control (provided).
● “REC MODE” can be set when the Power Switch is set
to “
” or “ ” (੬ pg. 15, 29).
● When “S/AV INPUT” is set to “ON”, camcorder playback
cannot be viewed on the AV output.
Menu Screen Explanations
੬ pg. 33.
੬ pg. 33.
੬ pg. 70.
Allows you to set the tape
recording mode (SP or LP)
depending on your preference
(
੬ pg. 15).
It is recommended you use
“REC MODE” in the “
VIDEO” Menu when using this
camcorder as a recorder during
dubbing (੬ pg. 59, 60).
Helps find a blank portion of tape
when you want to record from
the middle of a tape (
੬
pg. 44).
IMAGE: Enables dubbing of
images recorded on a tape to a
memory card (
੬
pg. 61).
OFF: Enables snapshots to be
taken during tape playback.
NAVIGATION:
Enables thumbnail
images to be made manually
during tape playback (੬ pg. 43).
੬ pg. 43.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (
੬ pg. 59).
OFF: Enables audio/video
signal output to a TV, VCR, etc.
via the AV and S-VIDEO
connectors (੬ pg. 54, 58).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
BLANK SRCH
COPY
NAVI.DEL.
S/AV INPUT
VIDEO/MEMORY Switch
SYSTEM
DISPLAY
Each setting is linked with “ DISPLAY” or
“ SYSTEM”, which appears when the
Power Switch is set to “
” (੬ pg. 30, 31).
The parameters are the same as in the
description on pg. 30, 31.
VIDEO
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)