Filter
Top Products
56
EN
Connection To A Personal Computer
This camcorder can transfer still images to a PC via
DV or USB connection as shown in the illustration.
1 Make sure the camcorder and PC are turned off.
2 Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3 If you are using the USB connection, set the
VIDEO/MEMORY switch to “MEMORY”.
•Only the still images stored on the memory card can
be transferred to a PC.
4 Turn the camcorder’s Power Switch to “ ”
while pressing down the Lock Button located on the
switch and turn on the PC.
•Refer to the instruction manual of the software on
how to transfer a still image to the PC.
•If the PC connected to the camcorder via the USB
cable is not powered on, the camcorder does not
enter the USB mode.
5 When finished, turn off the PC first, then the
camcorder.
NOTES:
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one
or more core filter. If a cable has only one core filter, the
end that is closest to the filter should be connected to
the camcorder.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (
੬ pg. 9).
● Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
● The date/time information cannot be captured into the
PC.
● Refer to the instruction manuals of the PC and provided
Software.
● The still images can also be transferred to a PC with a
DV connector-equipped capture board.
● When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
on the PC, or use the DV cable provided with the
capture board.
● The system may not work properly depending on the
PC or capture board you are using.
To DV
IN/OUT
To USB
connector
DV cable
(optional)
To DV
connector
USB cable
(provided)
To
USB
Power Switch
PC with DV connector USB-equipped PC
Core filter
Core filter
OR
“ACCESSING FILES” appears on the LCD
monitor while the PC is accessing data in the
camcorder or the camcorder is transferring a file
to the PC. Never disconnect the USB cable
while “ACCESSING FILES” is displayed on the
LCD monitor since this can result in product
damage.
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
CONNECTIONS
Advanced Connections