Filter
Top Products
EN
51
P
L
A
Y
O
F
F
ORMATF
EXECUTE
DATA?EXISTING
ERASE ALL
RETURN
MENU Wheel
Lock Button
Power
Switch
Display
Making A New Folder
New still pictures you are going to take can be
separated from previously shot pictures by resetting
the file name to DVC00001; these new pictures will be
stored in a new folder.
1 Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “ ” while pressing
down the Lock Button located on the switch.
• A stored file is displayed.
2 Make sure an IMAGE file is displayed (੬ pg. 26);
if not, press SELECT to access the MEMORY
SELECT Screen. Rotate the MENU wheel to select
“IMAGE”, then press it.
3 Press the MENU wheel in. The Menu Screen
appears. Rotate the MENU wheel to select
“NO. RESET”, then press it. The NO. RESET Screen
appears.
4 Rotate the MENU wheel to select “EXECUTE”,
then press it. The new folder (such as “101JVCGR”)
will be made and the file name of the next shot starts
from DVC00001.
Initializing A Memory Card
You can initialize a memory card anytime.
After initializing, all images and data stored on
the memory card, including those which have
been protected, are cleared.
1 Perform step 1 of “Making A New Folder” above.
2 Press the MENU wheel in. The Menu Screen
appears. Rotate the MENU wheel to select “FORMAT”
and press it. The FORMAT Screen appears.
3 Rotate the MENU wheel to select “EXECUTE”
and press it. The memory card is initialized. When
initialization is finished, “NO IMAGES STORED”
appears.
• To cancel initialization, rotate the MENU wheel to
select “RETURN” and press it.
CAUTION
Do not perform any other operation (such as turning
off the camcorder) during initialization. Also, be sure
to use the provided AC Power Adapter/Charger, as
the memory card may be corrupted if the battery
becomes exhausted during initialization. If the
memory card becomes corrupted initialize it.
Menu Screen
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Folder and File names
Each time shooting takes place, a file name is
made using a number which is larger by one than
the largest number of the file names which are in
use. Even if you delete an IMAGE file with a
number in the middle of range, the number will
not be used for a new shot; a gap will remain in
the numerical sequence. If the file name reaches
DVC09999, a new folder (such as “101JVCGR”)
will be made and the file name will start again
from DVC00001.
SELECT Button