Filter
Top Products
78
EN
•The optional headphones are not
connected to the headphone
connector.
•The sound volume of the
headphone connector was not
adjusted appropriately. The sound
volume at this point is the same as
the level it was adjusted to during
playback.
•The Power Switch is set to “ ” or
“ ”.
•The Power Switch is set to “ ” or
“ ”.
•The VIDEO/MEMORY Switch is set
to “VIDEO”.
•Your TV has AV input terminals, but
is not set to its VIDEO mode.
•The cassette holder cover is open.
•During playback of the unrecorded
portion, High-speed Search and still
playback, LCD monitor indications
appear distorted. This is not a
defect.
•The speaker volume is too great.
•Since the analog input mode is
engaged, the camcorder is in the
Record-Standby mode.
————
————
•Connect the optional headphones
to the headphone connector
(੬ pg. 82, 83).
•Adjust the sound volume during
playback (੬ pg. 25).
•Set the Power Switch to “ ”
(੬ pg. 25).
•Set the Power Switch to “ ”
(੬ pg. 26).
•Set the VIDEO/MEMORY
Switch to “MEMORY”.
•Set the TV to the mode or channel
appropriate for tape playback
(੬ pg. 54, 55).
•Close the cassette holder cover
(੬ pg. 12).
————
•Turn the speaker volume down
(੬ pg. 25).
•Set “S/AV INPUT” to “OFF” in the
Menu Screen (੬ pg. 32).
•Clean the video heads with an
optional cleaning cassette
(੬ pg. 90).
•Wipe them gently with soft cloth.
Wiping strongly can cause damage
(੬ pg. 80).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
During recording, sound
cannot be heard.
Play, Rewind and Fast-
Forward functions do not
work.
A memory card cannot be
played back.
The tape is moving, but
there is no picture.
The LCD monitor image is
distorted.
Images on the LCD monitor
are jittery.
There is no playback picture
on the connected TV.
Blocks of noise appear
during playback, or there is
no playback picture and the
screen becomes blue.
The LCD monitor, the
viewfinder and the lens
have become dirty (ex.
fingerprints).
TROUBLESHOOTING
(cont.)