Filter
Top Products
EN
59
Dubbing From A VCR
[To Use This Camcorder As A Recorder]
1 Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2 Set “S/AV INPUT” to “ON” and set “REC MODE”
to “SP” or “LP” (੬ pg. 32).
3 Connect the cables as shown in the illustration
and load a cassette to record on.
4 Press the Recording Start/Stop button to engage
the Record-Pause mode. “
AV. IN
” appears on the
screen.
5 Press the Recording Start/Stop button to start
recording. rotates.
6 Press the Recording Start/Stop button again to
engage the Record-Pause mode. stops rotating.
NOTES:
● After dubbing, set “S/AV INPUT” back to “OFF”.
● Analog signals can be converted to digital signals with
this procedure.
● It is also possible to dub from another camcorder.
VCR
Connector
cover**
To AV
To
S-VIDEO
Audio/Video
cable
(provided)
White to
AUDIO
L OUT
Red to
AUDIO
R OUT
To
S-VIDEO
OUT
S-Video
cable
(provided)
Yellow to
VIDEO
OUT*
Power Switch
TV
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.