EN
47
TO MAKE VIDEO CLIPS FROM RECORDED
VIDEO FOOTAGE
1 Load a memory card (੬ pg. 13) and cassette
(੬ pg. 12). Set the VIDEO/MEMORY Switch to
“VIDEO”, then set the Power Switch to “ ”
while pressing down the Lock Button located on the
switch.
2 Select the image size (੬ pg. 46, steps 2 through
4 of “TO MAKE VIDEO CLIPS FROM REAL-TIME
CAMERA IMAGE”).
3 Press
4
/6 to start tape playback.
4 Press E-MAIL. “E-MAIL CLIP STANDBY”
appears and the camcorder enters the E-Mail Clip
Record-Standby mode.
5 Press the Recording Start/Stop Button to start E-
Mail Clip Recording.
6 Press the Recording Start/Stop Button to stop E-
Mail Clip Recording. “COMPLETED” is displayed,
then the camcorder re-enters the E-Mail Clip Record-
Standby mode.
7 Press E-MAIL to end E-Mail Clip Recording. The
normal screen reappears.
To cancel E-Mail Clip Recording . . .
.....after step 4, press E-MAIL again or press 5 to
stop tape playback.
To view video clips stored on a memory card . . .
.....੬ pg. 26, 27.
NOTES:
● Playback operation cannot be performed during E-Mail
Clip Recording.
● If the end of the tape is reached in step 4, the E-Mail
Clip Record-Standby mode will be automatically
canceled.
● The video clip files made with this camcorder are
MPEG4 compliant, however, some MPEG4 files made
with other devices may not be played back with this
camcorder.
● You can delete unwanted video clips (
੬ pg. 50,
“Deleting Files”) or protect important ones from
accidental erasure (੬ pg. 49, “Protecting Files”).
● TITLE and TITLE Index screen (
੬ pg. 48) cannot be
used during E-Mail Clip recording.
● Video noise may appear while viewing video clips in the
LCD monitor or viewfinder, however, this noise is not
present in the actual video clips stored on the memory
card.
● You can also view video clips on your PC by using
Windows
®
Media Player. Refer to the instructions of the
PC and software.
Power Switch
E-MAIL Button
Play/Pause Button (
4
/6)
Stop Button (5)
Lock Button
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Recording Start/Stop Button