Filter
Top Products
20
CAMERA MODE SELECT Screen
Item Function
Variable Factory
range setting
V. PHASE
POS. TEXT
LOC.
ALM. TEXT
SIZE
BLC EDIT 1
BLC EDIT 2
Used to adjust and align the vertical phase
of the camera body with other cameras
operating in the Line Lock (LL) mode.
Adjust while viewing the monitor screen.
Adjustment is made by tilting the PAN/TILT
control lever to the left or right.
Used to select the location for displaying
position text.
UP-L: Displays the text in the upper
left corner of the screen.
DOWN-L: Displays the text in the lower
left corner of the screen.
UP-C: Displays the text in the center
of the upper part of the screen.
DOWN-C: Displays the text in the center
of the lower part of the screen.
UP-R: Displays the text in the upper
right corner of the screen.
DOWN-R: Displays the text in the lower
right corner of the screen.
Used to select the size of the characters
displayed during ALARM.
Pressing the SET button displays the
screen (BLC EDIT 1 screen) on which the
user can set the backlight compensation
metering area.
੬ See “BLC EDIT Screen” on page 25.
Pressing the SET button displays the
screen (BLC EDIT 2 screen) on which the
user can set the backlight compensation
metering area.
੬ See “BLC EDIT Screen” on page 25.
Changing Camera Settings Using the RM-P2580
0 to 255
UP-L
DOWN-L
UP-C
DOWN-C
UP-R
DOWN-R
NORMAL
DOUBLE
127
UP-L
DOUBLE
NORMAL
DOUBLE
ALARM
ALARM
Used for setting functions separately for each camera.