Filter
Top Products
33
3.
Setting of Alarm Condition Duration (DURATION)
Set how long the alarm condition should last from when the alarm signal is supplied.
(੬ See page 24.)
Memo:
When a new alarm signal is input during the alarm condition, the alarm condition is prolonged.
4.
Setting the Alarm Position (POSITION)
Set the preset position to be invoked when the alarm condition is generated.
(੬See page 24.)
5.
Setting the Alarm Text Size (ALM. TEXT SIZE)
The “ALARM” text indication can be displayed on the screen to indicate the alarm con-
dition when this is generated. The size of the characters should be set. (੬See page
20.)
Memo:
Minimum 70 ms or more is required for the camera body to detect the switched condition of the
contact.
Example: In the case of MAKE
70 ms
SHORT
Alarm detection
Alarm detection not
guaranteed
OPEN
70 ms or
more