Filter
Top Products
29
4.
Use the PAN/TILT control lever to align
the cursor (>) with the RETURN POSI-
TION SET item. When the SET button
is pressed, the RETURN POSITION
SET screen is displayed.
● Adjust the angle of view at the return
position using the PAN/TILT control
lever.
5.
When the MENU button is pressed,
“DATA SAVED” is displayed on the
screen for about 3 seconds before the
AUTO PAN SET screen returns.
● The set angle of view at the return po-
sition is saved.
6.
When both the start position and the
return position have been set, press the
MENU button.
● The camera’s SETUP screen returns.
Ⅲ To activate the auto pan operation of the
camera, press the AUTO PAN button on
the RM-P2580.
RETURN POSITION SET screen
NPOTURRE SITION SET
Memo:
• Movement in the up and down direction (tilt)
and lens operation are not possible at the
stop (return) position.
• Correct setting data will not be memorized if
the SET button or MENU button is pressed
while the camera is moving. Be sure to
confirm that the camera has stopped before
pressing the SET or MENU button.