Filter
Top Products
27
POSITION TEXT Setting
1.
Select the POSITION TEXT.. item on the
TEXT EDIT screen, and then press the SET
button.
● The POSITION TEXT screen is displayed
on the monitor. Characters selected from
the character area are displayed in the text
input area.
Ⅲ Select the position for which position title
text should be set. Use the POSITION
button → Numeric key → ENTER button
to select the position.
੬ For details, see the instruction manual
for the RM-P2580.
2.
Use the ZOOM (TELE) or ZOOM (WIDE)
button to select the position in the text input
area.
The position moves to the right when the
ZOOM (TELE) button is pressed, and it
moves to the left when the ZOOM (WIDE)
button is pressed.
3.
Use the PAN/TILT control lever to select the
character to be input from the character
area.
4.
When the first character for the text has
been selected, press the ZOOM (TELE)
button.
● The first character of the text is confirmed,
and the second character (shown blinking)
can now be input.
5.
To set other position text titles, select the
position and then repeat steps
2.
to
4.
to
set the text.
6.
When setting of all titles is completed, press
the MENU button.
● “DATA SAVED” is shown on the monitor
for about 3 seconds, and then the TEXT
EDIT screen returns.
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERACAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILTLENS
CAMERA/POSITION
CAMERA POSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
RM-P2580
ALARM
POWER
KEY LOCK
RM-P2580
MENU
button
SET
button
Numeric key
PAN/TILT control lever
POSITION button
ENTER button
ZOOM
(TELE)
button
ZOOM
(WIDE)
button
TEXT EDIT
CAME A TREX..T
POSI IONTEXT..T
TEXT EDIT screen
Space
Character area
Text input area
POSITION TEXT screen
SITION T TEXOP
0123 56789ABCDEFGHIJK4
LMNOP RSTUVWXYZQ
SE ECT TEXT
>
ZOOML
abcdefg
hi j kl nopqrstuvwxyz. , ’m
-:/
SITION T TEXOP
0123 56789ABCDEFGHIJK4
LMNOP RSTUVWXYZQ
SE ECT TEXT
>
ZOOML
abcdefg
hi j kl nopqrstuvwxyz. , ’m
-:/
PO IS
A title can be set for the registered positions for each camera. The position text can consist
of up to 16 characters.