Filter
Top Products
24
PANIC ALARM SET Screen
Item Function
Variable Factory
range setting
DURATION
POLARITY
POSITION
MODE
5, 6, 7, 8, 9,
10, 15, 20,
25, 30,
60 s,
SERIES
MAKE
BREAK
HOME
POS 1 to
POS 15
ALARM
MANUAL
10 s
MAKE
POS 1
ALARM
Changing Camera Settings Using the RM-P2580
FACTORY SETTINGS Screen
Item Function
Variable Factory
range setting
FACTORY
SETTINGS
YES
NO
Used for settings related to the panic alarm input. (੬ See “PANIC ALARM” on page 32.)
Used for returning all settings to the default values.
Used to return menu settings to the factory
settings.
YES: Returns settings to the factory settings.
NO: Settings are not returned to the factory
settings.
Memo:
When YES is selected and the SET button is
pressed, after “EXECUTING” has been
displayed for about 10 seconds on the screen,
“DATA CLEARED” is shown for about 3 seconds.
Do not turn off the power during this interval.
NO
Sets the duration of the alarm mode operation
when alarm signal is input.
When set to SERIES, alarm mode operation continues.
Note:
When used in a system with the RM-P2580, this
setting becomes invalid. Make the setting using
the RM-P2580 ALARM TIME option.
Sets the polarity of the alarm input.
MAKE: Alarm condition generated when
MAKE connected.
BREAK: Alarm condition generated when
BREAK connected.
Sets the camera position at the time of alarm
input.
Sets whether or not manual operation should
be accepted during alarm operation.
ALARM: Manual operation not accepted dur-
ing alarm operation.
MANUAL: Manual operation is accepted also
during alarm operation.
Note:
When used in a system with the RM-P2580, this
setting becomes invalid. The mode becomes the
ALARM priority mode.