Filter
Top Products
31
2.
Press the PAN/TILT control lever up (ᮡ)
or down (ᮢ) to align the cursor (>) with
the PATROL No. item to be set.
● To set the PATROL 9 to 16 items, press
the ZOOM (TELE) button to display the
next AUTO PATROL setting screen.
3.
Set the position number of the selected
PATROL No. item.
● Use the POSITION button → Numeric
key → ENTER button to make the set-
ting.
4.
Set the observation interval for the se-
lected PATROL No.
Press the PAN/TILT control lever to the
left (
ᮤ) or to the right (ᮣ) to make the
setting.
● If set to SKIP, observation will not take
place at this position.
5.
Repeat steps
2.
to
4.
to set the position
number and observation interval for all
the PATROL No. items.
6.
When done with the setting is com-
pleted, press the MENU button.
● “DATA SAVED” is displayed on the
monitor for about 3 seconds before the
camera SETUP screen returns.
Ⅲ To start the AUTO PATROL operation,
press the AUTO PATROL button on the
RM-P2580.
UTO PATROLA
PATR L9 POS8 1
1
1
1
1
1
1
1
0sO
PATR L1 POS9 0sO
PATR L1 POS1 0sO
PATR L1 POS1 0sO
PATR L1 POS1 0sO
PATR L1 POS1 0sO
PATR L1 POS1 0sO
PATR L1
0
1
2
3
4
5
6POS1
0
1
2
3
4
50sO
WDFBW/
>
ZDOMO
The next AUTO PATROL screen