Filter
Top Products
Voice memo allows up to fifteen seconds of audio to be
recorded with a still image. The function is activated in
section 2 of the recording menu (p. 80) and is used in
unison with instant playback. When the function is active,
the microphone indicator is displayed on the monitors.
Voice memo must be set before taking a picture. It will
remain in effect until reset.
101
VOICE MEMO
Int. set –
Bracket set Off
Data imprint Off
Imprint to Image + Exif
Inst.playback 10 sec.
Voice memo On
After the instant playback period, a screen will appear
indicating the audio recording has started. A status bar will
display the amount of recorded time. The recording will
stop when the fifteen second recording period has ended
or by pressing the center button of the controller.
A voice memo is attached to the last image of a
continuous-advance or continuous-advance bracketing
series (p. 61). The voice memo can be played back in
Quick View and the playback mode (p. 115).
Recording audio.
:stop
Microphone
When making audio recordings, be careful not to touch or
cover the microphone. The quality of the recording is
proportional to the subject to microphone distance. For
best results, hold the camera approximately 20cm (8in)
from your mouth.
During instant playback, if the central button of the
controller is pressed, the image is saved and the voice-
memo recording starts. If the shutter-release button is
pressed partway down, the image is saved and the voice-
memo recording is canceled.
Recording Tips